Datacom Systems SS series SPAN Guide de l'utilisateur télécharger pdf (Page 71)

Application 71

The factory default for all Any-to-Any ports on all aggregation taps (SS-1200-S series and

SS-2200-S series) are turned off by default - i.e. they are not set up as either inputs or

outputs and are not replicated to any other ports with the exception of the hard-wired in-

line taps.

The default configuration has Ports 1 and 2 hard-wired as an inline tap. Ensure there are no previous

settings present, go through Ports 1-4 and set them to OFF as shown:

# SET PORT MONITOR 1 OFF

# SET PORT MONITOR 2 OFF

# SET PORT MONITOR 3 OFF

# SET PORT MONITOR 4 OFF

Now you can begin setting the Tap and Any-to-Any ports as to which port inputs the data and

which ports aggregate and/or output the data.

Port 3 is set as output for Port 1 and 2’s input which is set with this syntax:

# SET PORT MONITOR 3 FROM 1,2

Port 4 is set as output for Port 1 and 2’s input which is set with this syntax:

# SET PORT MONITOR 4 FROM 1,2

IMPORTANT: If desired, this BT tap could be configured to have traffic, for example TCP resets,

injected from Any-to-Any ports.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 109 110

Pas de commentaire

Datacom Systems SS series SPAN Guide de l'utilisateur Page 71