Datacom Systems SS series SPAN Guide de l'utilisateur télécharger pdf (Page 40)

SS-1200-S, SS-2200-S and SS-4200-S Series Link Aggregating Taps40

4.2 SERIAL Port Configuration (DB9)

Use of the SERIAL DB9 port, which is fairly simple and straight forward, is strongly recommended

for initial configuration of the hardware.

4.2.1 HyperTerminal

NOTE: HyperTerminal is the preferred terminal emulation program.

Any freely available terminal emulator may be utilized, but please note the specific HyperTerminal

setup if using an alternate terminal emulator. Once connection is made to the SERIAL DB9 port,

open the HyperTerminal connection with the following settings:

9600 bits per second

8 data bits

Parity none

1 stop bit

Flow control none

After completing review of the Command Line Interface (CLI) and Exercise - CLI setting Ports

sections, IP Address configuration can be found in the IP Address Configuration section.

4.3 MANAGEMENT Port Configuration (RJ45)

NOTE: HyperTerminal is the preferred terminal emulation program and Microsoft

DOS-Windows

Telenet is the preferred Telnet client.

The factory configured IP Address, Subnet Mask and Default Gateway are as follows:

IP Address: 192.168.1.1

Subnet Mask: 255.255.0.0

Default Gateway: 192.168.1.0

50 42

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 109 110

Pas de commentaire

Datacom Systems SS series SPAN Guide de l'utilisateur Page 40