Datacom Systems D56 Guide de dépannage télécharger pdf (Page 8)

–8–

Security Codes

• One installer code for entire system (user 1)

• One Master code for entire system (user 2)

• 12 secondary user codes (users 3–14)

• One baby-sitter code (user 15)

• One duress code (user 16)

Baby-sitter Code: A special code that can only be used to disarm the system if

that particular code (or the installer code) was used to arm it.

Duress Code: An emergency code which, when entered by

any

user to disarm

or arm the system, will send a silent duress message to the central station.

Keypad Panic Keys

•Up to 3 programmable panic key functions are provided.

•Designated as Zones 95, 96, 99

•Activated by wired & wireless keypads

• Distinguished by subscriber ID number

Zone Monitor Feature

• The control will sense a high resistance in the loops on hard-wired

zones 2–8 if it is present, and will display a trouble message (rather

than an alarm) for the affected zone when the system is in the disarmed

mode. This feature also prevents the system from being armed while

this high resistance condition exists.

Exit Error False Alarm Prevention Feature

• Enables the system to determine the difference between an actual

alarm and an alarm caused by leaving an Entry/Exit or Interior zone

open after the exit delay expires. If not disarmed in time, an alarm will

sound and an “Exit Error” report sent to the central station.

• An Exit Alarm condition will also occur if an Entry/Exit or Interior zone

re-opens within 2 minutes after the end of an exit delay.

Optional Output Relays and Powerline Carrier Devices (X-10 type)

• Up to 4 relays using one 4204 Relay Module

• Up to 2 relays using one 4229 Zone/Relay Module

• Up to 8 Powerline Carrier devices (you must subtract the number of

relay outputs actually used by the 4204 or 4229 modules, if used)

• Actions programmable to respond to zone activity or manual keypad

entries

Powerline Carrier devices require the use of optional 4300 transformer module

instead of the supplied 1321 AC transformer.

Optional Phone Module

• Supports the Ademco 4285/4286 Phone Module

• Provides access to the system via on premises or off-premises phones

for arming, disarming, etc., plus control of relay outputs and Powerline

Carrier devices.

Paging Feature

• If programmed, the paging feature permits up to 16-digits to be sent to

a pager for user-determined messaging, followed by a system

generated 7-digit condition code which indicates the type of condition

that has occurred and the user number or zone number of occurrence.

Audio Alarm Verification Option

• Provides a programmable Audio Alarm Verification (AAV) option which

can be used in conjunction with an output relay to permit voice dialog

between an operator at the central station and a person at the premises.

• Requires the use of optional AAV unit, such as Eagle model 1241.

The AAV option may not be used in UL installations.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

Datacom Systems D56 Guide de dépannage Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Datacom Systems D56