Datacom Systems D56 Guide de dépannage télécharger pdf (Page 54)

–54–

DIALER

PROGRAMMING(

✱

40 –

✱

44 and

✱

47 –

✱

50)

✱

Enter up to 6 digits if PABX is needed to access an outside line. If

fewer than 6 digits are needed to be entered, exit by pressing [

✱

] and

next field number (e.g., 41). To clear entries from field, press

✱

Fields

✱

40,

✱

41,

✱

42:

Enter up to the number of

digits shown. Do not fill

unused spaces.

Enter 0–9,

# + 11 for

✱

# + 12 for #

# + 13 for a pause

(2 seconds)

✱

41 PRIMARY PHONE No. (See Box at Left)

| | | | | | | | | | | | | | | | | | |

Enter up to 20 digits. If fewer than 20 digits entered, exit by pressing

[

✱

]

and next field number (e.g., 42). To clear entries from field, press

✱

Note: Back-up reporting (8 calls are made to the secondary phone

number if no kiss-off is received after 8 attempts to the primary

number) is automatic only if there is a secondary phone number (field

✱

42).

✱

42 SECONDARY PHONE No. (See Box at Left)

| | | | | | | | | | | | | | | | | | |

Enter up to 20 digits. If fewer than 20 digits entered, exit by pressing

[

✱

]

and next field number (e.g., 43). To clear entries from field, press

✱

. See back-up reporting note for field

✱

41. If using the pager

feature, enter the pager phone number here.

For Fields

✱

43 and

✱

44:

Enter digits 0–9; # +11=B; #

+12=C; # +13=D; # +14=E; or

# +15=F.

Enter [

✱

]

as the fourth digit if a

3-digit account number (for 3+1

dialer reporting format) is used.

Enter 0 as the first digit of a 4-

digit account number for Nos.

0000–0999. Exit field by

pressing [

✱

]

(and press next

field number) if only 3 digits are

used.

To clear entries from field,

press

✱

✱,

✱

✱.

See blank Programming Form

for examples of Account No.

entries.

✱

43 PRIMARY SUBS ACCOUNT. No. | | |

See box at left.

✱

44 SECONDARY SUBS ACCOUNT. No. | | |

See box at left.

✱

47 PHONE SYSTEM SELECT 3

If Central Station Receiver is not on WATS line:

0 = Pulse Dial

1 = Tone Dial

If Central Station Receiver is on WATS line:

2 = Pulse Dial

3 = Tone Dial

✱

48 REPORT FORMAT 7 7

0 = 3+1; 4+1 ADEMCO Low Speed Standard Prim. Sec.

1 = 3+1; 4+1 Radionics Standard

2 = 4+2 ADEMCO Low Speed Standard

3 = 4+2 Radionics Standard

6 = 4+2 ADEMCO Express

7 = ADEMCO Contact ID Reporting

8 = 3+1; 4+1 ADEMCO Low Speed Expanded

9 = 3+1; 4+1 Radionics Expanded

Enter

✱

as the 4th digit of

✱

43 and

✱

44, if 3+1 dialer reporting is to

be used.

For an explanation of these formats, see the SYSTEM

COMMUNICATION section.

Note: The maximum number of alarm and alarm restore reports

during one armed period is determined by field

✱

93.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

Datacom Systems D56 Guide de dépannage Page 54

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Datacom Systems D56